PRESERVATIVE TREATMENT: CCA preservative treated lumber and plywood
bearing the Hoover Treated Wood Products, Inc., identification stamp is pressure
impregnated to comply with the following:
1. Preservative shall be CCA Type C in accordance with American Society of
Testing and Materials (ASTM) Standard D-1625 and Federal Specification TT-W-
550.
2. Pressure impregnation shall be in accordance with methods detailed by ASTM
Standard D-1760 and Federal Specification TT-W-571.
3. Each piece of lumber and plywood shall bear a Hoover Treated Wood Products,
Inc., treating identification mark indicating retention and applicable standards.
4. Lumber shall be kiln dried after treatment (
KDAT) to a moisture content of
19% or less.
5. Plywood shall be kiln dried after treatment (KDAT) to a moisture content of
18% or less.
6. Lumber shall be Southern Pine, Mixed Southern Pine, Hem-Fir, Spruce Pine Fir
or other recognized species capable of meeting preservative penetration
requirements
7. Plywood veneers shall be composed of only softwood species, glued with
waterproof adhesives.
DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY HOOVER TREATED WOOD PRODUCTS, INC.: The
information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use
are beyond our control, Hoover Treated Wood Products, Inc. (“Hoover”), disclaims all liability and assumes no legal responsibility for damages resulting
from use of or reliance upon the information contained herein.
E-mail Hoover's Technical Service Department or request sales information.
